i have a 2000 oldsmobile silhouette we changed the oil but dont know how to get the change oil light to go off. we have tried pumping gas 3 time while engine off in on position and brakes nothing happened light still onHow to get change oil light to go off?
Try hooking up a code reader and erasing it that way. Also re-read the reset procedure in the manual. You may be skipping a step.How to get change oil light to go off?
cut the wire to the lightHow to get change oil light to go off?
Disconnect the battery cable for a period of time or overnight then connect back up. This should take care of it. Let me know.How to get change oil light to go off?
or you could just hold the trip meter button
depends on the vehicle,though
idiots
Wednesday, September 14, 2011
How do I change the bulb in my rear brake lights? 2001 Sebring?
2001 Sebring. Rear Brake light. I can't figure out how to get the bulb to replace it. It looks like it is in cased from the trunk. Is there a hidden bolt or something that I am not seeing?How do I change the bulb in my rear brake lights? 2001 Sebring?
You will just need to pull pack the carpet in the trunk on the side that needs replaced, then there will be lamp sockets and they should just twist out. Good luck!How do I change the bulb in my rear brake lights? 2001 Sebring?
Check outside on the lamp face/housing for any screws....
If they're all inside, you probably have 3 or 4 of those plastic nuts to undo.... also remember that there will probably be some kind of plastic tab that also holds the lamp housing in place to the body....How do I change the bulb in my rear brake lights? 2001 Sebring?
Open the trunk lid and the sockets should be right there. Just twist them out and pull out the bulbs.
You will just need to pull pack the carpet in the trunk on the side that needs replaced, then there will be lamp sockets and they should just twist out. Good luck!How do I change the bulb in my rear brake lights? 2001 Sebring?
Check outside on the lamp face/housing for any screws....
If they're all inside, you probably have 3 or 4 of those plastic nuts to undo.... also remember that there will probably be some kind of plastic tab that also holds the lamp housing in place to the body....How do I change the bulb in my rear brake lights? 2001 Sebring?
Open the trunk lid and the sockets should be right there. Just twist them out and pull out the bulbs.
Citroen xsara picasso brake light bulb?
just wondering if anyone knows how to get to the brake light bulb to change it please? is it an inside job and i have to remove the interior panel or is there someway of doing it from the outside? thanksCitroen xsara picasso brake light bulb?
Open the boot.
Look behind the brake light in the interior, you will see a section of boot lining about 5cm square that can fold open. Open this towards you.
You will see a square of grey foam, pull that out.
Now you can see the wires going into the back of the light, shine a torch downwards in here and you will see a shiny metal clip that latches the light (red plastic) into a square metal hole of the car body. Using a screwdriver lever this clip up and outwards.
This will release the bottom of the light. From outside the car pull the light cluster down and away from the vehicle to release the top clip. Disconnect the wiring plug from the lights and unclip the bulb board from the light cluster to access the bulbs. Once the light is reassembled just push it back into the hole making sure it is lined up properly to refit.
Open the boot.
Look behind the brake light in the interior, you will see a section of boot lining about 5cm square that can fold open. Open this towards you.
You will see a square of grey foam, pull that out.
Now you can see the wires going into the back of the light, shine a torch downwards in here and you will see a shiny metal clip that latches the light (red plastic) into a square metal hole of the car body. Using a screwdriver lever this clip up and outwards.
This will release the bottom of the light. From outside the car pull the light cluster down and away from the vehicle to release the top clip. Disconnect the wiring plug from the lights and unclip the bulb board from the light cluster to access the bulbs. Once the light is reassembled just push it back into the hole making sure it is lined up properly to refit.
How do I turn off the Brake Pad Wear light on the dashboard of my e36 BMW?
I've just had my brakes changed and the mechanic said that he couldn't make the light turn off. Anyone else in the same boat? Or know what to do?How do I turn off the Brake Pad Wear light on the dashboard of my e36 BMW?
You could go to your local parts store our mechanic and have them just take it off with thier computer or this actually means that the brake wear sensor needs to be replaced. Which means that you need new brakes. The brake senseor goes near the brake pads their is usally one in back and one in front and are usually $30. Dont buy parts from dealers I found them to be extremely expensive just go to local parts store. Good Luck!How do I turn off the Brake Pad Wear light on the dashboard of my e36 BMW?
Perhaps the brake pad sensor was not replaced. If it was, assuming that the sensor is not defective,
then all that is needed is to turn on the key but do not start the engine, then wait approximately
30 seconds, the brake pad light will turn off by itself.How do I turn off the Brake Pad Wear light on the dashboard of my e36 BMW?
I work as a mechanic, and we usually have to remove codes from the ABS computer to get that light to turn off. Either that, or your mechanic didn't replace the pad sensors.
You could go to your local parts store our mechanic and have them just take it off with thier computer or this actually means that the brake wear sensor needs to be replaced. Which means that you need new brakes. The brake senseor goes near the brake pads their is usally one in back and one in front and are usually $30. Dont buy parts from dealers I found them to be extremely expensive just go to local parts store. Good Luck!How do I turn off the Brake Pad Wear light on the dashboard of my e36 BMW?
Perhaps the brake pad sensor was not replaced. If it was, assuming that the sensor is not defective,
then all that is needed is to turn on the key but do not start the engine, then wait approximately
30 seconds, the brake pad light will turn off by itself.How do I turn off the Brake Pad Wear light on the dashboard of my e36 BMW?
I work as a mechanic, and we usually have to remove codes from the ABS computer to get that light to turn off. Either that, or your mechanic didn't replace the pad sensors.
2003 Chevy Silverado Oil Change Light?
I have a 03 Chevy silverado how do i clear out the oil change light i changed the oil my self is it in the computer or what? My 95 Impala ss was just start the car pump the brake 3 times then shut the car off and do it with it off is there something like this on this model of truck or doest the dealership have to reset it thanks for any info2003 Chevy Silverado Oil Change Light?
THESE GUYS ARE RIGHT. BUT IT IS ACCORDING TO WHERE THE LIGHT IS. SOME HAVE AN ACTUALL LIGHT THAT LOOKS LIKE AN OIL LAMP. OTHERS HAVE A DIGITAL READING ACROSS WHERE THE MILEAGE IS SHOWN. OTHERS SHOW AND ENGINE BLOCK. EITHER WAY CUT THE KEY ON BUT DO NOT START. PUMP THE GAS PEDAL TO THE FLOOR 3 TIMES WITHIN 5 SECONDS. WAIT!!! IF YOU HAVE THE ENGINE BLOCK OR THE OIL LAMP SYMBOL IT WILL START BLINKING WHEN IT IS RESET AND YOU CAN CUT THE KEY OFF AND START THE VEHICLE AND THE LIGHT SHOULD GO OFF. IF YOU HAVE THE DIGITAL ONE IT WILL READ OIL LIFE RESET. THEN YOU CAN CUT THE KEY OFF AND START THE ENGINE. EITHER WAY IT SHOULD ONLY TAKE A FEW SECONDS TO DETERMINE WHETHER IT IS RESET. SOMETIMES YOU DO HAVE TO DO THIS MORE THAN ONE TIME.2003 Chevy Silverado Oil Change Light?
make sure the truck is off. pump the gas pedal 3 times then turn on the truck. it should be off and if not turn off and turn on again.2003 Chevy Silverado Oil Change Light?
turn key to on!!dont start! hit the gas 3 times that will reset the code! Good Luck2003 Chevy Silverado Oil Change Light?
On the Chevy the procedure is similar. Read the manual. I know the manual for my 2004 trailblazer had the reset procedure in 3 different places...before it was stolen.2003 Chevy Silverado Oil Change Light?
I have an 03 GMC and had the same problem. I turned the key to accessory, pumped the Gas pedal 3 times and it cleared the message. This is so weird to have to do this with all the technology in the world.
TJC2003 Chevy Silverado Oil Change Light?
i own a repair shop,and id look in the manual on it all the procedures are pretty much the same with the key in the accessory position,pump the gas pedal 3 times then cut the truck on,and it should clear it,i have had to do it more than once,before but it always works,good luck with it i hope this help,s.2003 Chevy Silverado Oil Change Light?
Disconnect the battery for 5 minutespc or mac shampoos for curly hair
THESE GUYS ARE RIGHT. BUT IT IS ACCORDING TO WHERE THE LIGHT IS. SOME HAVE AN ACTUALL LIGHT THAT LOOKS LIKE AN OIL LAMP. OTHERS HAVE A DIGITAL READING ACROSS WHERE THE MILEAGE IS SHOWN. OTHERS SHOW AND ENGINE BLOCK. EITHER WAY CUT THE KEY ON BUT DO NOT START. PUMP THE GAS PEDAL TO THE FLOOR 3 TIMES WITHIN 5 SECONDS. WAIT!!! IF YOU HAVE THE ENGINE BLOCK OR THE OIL LAMP SYMBOL IT WILL START BLINKING WHEN IT IS RESET AND YOU CAN CUT THE KEY OFF AND START THE VEHICLE AND THE LIGHT SHOULD GO OFF. IF YOU HAVE THE DIGITAL ONE IT WILL READ OIL LIFE RESET. THEN YOU CAN CUT THE KEY OFF AND START THE ENGINE. EITHER WAY IT SHOULD ONLY TAKE A FEW SECONDS TO DETERMINE WHETHER IT IS RESET. SOMETIMES YOU DO HAVE TO DO THIS MORE THAN ONE TIME.2003 Chevy Silverado Oil Change Light?
make sure the truck is off. pump the gas pedal 3 times then turn on the truck. it should be off and if not turn off and turn on again.2003 Chevy Silverado Oil Change Light?
turn key to on!!dont start! hit the gas 3 times that will reset the code! Good Luck2003 Chevy Silverado Oil Change Light?
On the Chevy the procedure is similar. Read the manual. I know the manual for my 2004 trailblazer had the reset procedure in 3 different places...before it was stolen.2003 Chevy Silverado Oil Change Light?
I have an 03 GMC and had the same problem. I turned the key to accessory, pumped the Gas pedal 3 times and it cleared the message. This is so weird to have to do this with all the technology in the world.
TJC2003 Chevy Silverado Oil Change Light?
i own a repair shop,and id look in the manual on it all the procedures are pretty much the same with the key in the accessory position,pump the gas pedal 3 times then cut the truck on,and it should clear it,i have had to do it more than once,before but it always works,good luck with it i hope this help,s.2003 Chevy Silverado Oil Change Light?
Disconnect the battery for 5 minutes
How do I enable the traction? Have a 95 cadillac seville sls. Brake line recently broke. Abs light and?
traction disabled light came on. I changed all the brake lines including the two lines from the master to the abs, putr in new brake pads front and back and bled system. Brakes work but panel still reads traction disabled and abs light still stays on?How do I enable the traction? Have a 95 cadillac seville sls. Brake line recently broke. Abs light and?
Air in master cylinder? Chances are you need to have the ECM reset. Disconnecting the battery will probably not clear it. Call your local dealer for more info. Caddys are a whole 'nother world when it comes to sensors and electronics.How do I enable the traction? Have a 95 cadillac seville sls. Brake line recently broke. Abs light and?
Caddys codes can be reset through the climate control panel. Having owned 4 Caddys, they all worked the same.
There is a sequence to pushing the buttons. Try alldatadiy.com. Its a subscription site, but it's always had the answer I needed, including how to reset the onboard computer.And I use it to get an idea as to how much time a repair should take so I know if I am getting ripped off by the repair shop for extra hours of labor that were not called for.
Air in master cylinder? Chances are you need to have the ECM reset. Disconnecting the battery will probably not clear it. Call your local dealer for more info. Caddys are a whole 'nother world when it comes to sensors and electronics.How do I enable the traction? Have a 95 cadillac seville sls. Brake line recently broke. Abs light and?
Caddys codes can be reset through the climate control panel. Having owned 4 Caddys, they all worked the same.
There is a sequence to pushing the buttons. Try alldatadiy.com. Its a subscription site, but it's always had the answer I needed, including how to reset the onboard computer.And I use it to get an idea as to how much time a repair should take so I know if I am getting ripped off by the repair shop for extra hours of labor that were not called for.
How to contest a brake light ticket?
I'm unsure how to contest the ticket.
The brake light is now fixed. I bought the light and changed it, now what?
Show the receipt to the judge? Do i have to go to court? And Do I just show up or do i have to make an apt to do all this?
I'm confusedHow to contest a brake light ticket?
Not sure about the other contributor's jurisdiction but in NV, this is a %26quot;fix-it ticket%26quot;. Once your equipment violation is corrected, stop by the local PD office and have an officer sign stating the violation is fixed. Next go to the courthouse and have them record the new status........problem fixed! If you don't fix it then you risk the chance of another citation and if the officer sees you have been cited for the same thing, off to jail you go. How to contest a brake light ticket?
Your ticket should tell you the date and time of your court appearance. If not, contact your local traffic court. There will be a reference number on the ticke that they can look up for you. And yes, you will have to go to court if you want to contest the ticket.
Since you were guilty, I would advise that you humbly tell the judge that you are sorry, that you promptly had the brake light fixed, and you would appreciate his understanding. Unless there is more to the story than you've presented here, you won't win on any legal grounds.
Good luck.How to contest a brake light ticket?
Why would you like to contest the ticket. You seem to be admitting your light was broken. On the other hand, yes there are techniques for your court appearance that will help you get out of the ticket. Admitting that you replaced the brake light might not help in that regard! See the blog spot for detailed advice.
The brake light is now fixed. I bought the light and changed it, now what?
Show the receipt to the judge? Do i have to go to court? And Do I just show up or do i have to make an apt to do all this?
I'm confusedHow to contest a brake light ticket?
Not sure about the other contributor's jurisdiction but in NV, this is a %26quot;fix-it ticket%26quot;. Once your equipment violation is corrected, stop by the local PD office and have an officer sign stating the violation is fixed. Next go to the courthouse and have them record the new status........problem fixed! If you don't fix it then you risk the chance of another citation and if the officer sees you have been cited for the same thing, off to jail you go. How to contest a brake light ticket?
Your ticket should tell you the date and time of your court appearance. If not, contact your local traffic court. There will be a reference number on the ticke that they can look up for you. And yes, you will have to go to court if you want to contest the ticket.
Since you were guilty, I would advise that you humbly tell the judge that you are sorry, that you promptly had the brake light fixed, and you would appreciate his understanding. Unless there is more to the story than you've presented here, you won't win on any legal grounds.
Good luck.How to contest a brake light ticket?
Why would you like to contest the ticket. You seem to be admitting your light was broken. On the other hand, yes there are techniques for your court appearance that will help you get out of the ticket. Admitting that you replaced the brake light might not help in that regard! See the blog spot for detailed advice.
Subscribe to:
Posts
(Atom)