Saturday, November 20, 2010

How to change brake light on 2003 cts?

To replace the tail, stop, turn signal or side-marker lamps use the following procedure:

1. Open the trunk using the trunk button on the remote keyless entry transmitter or the trunk release button located on the lower part of the driver檚 door.

2. Remove the compact spare tire cover by turning the wing nut counterclockwise.

3. Remove the four convenience net wing nuts.

4. Pull the carpet back away from the body of the vehicle on the side with the burned out bulb.

5. Remove the two mounting screws from the lamp assembly.

6. Pull out the lamp assembly to expose the bulb sockets.

7. Turn the bulb socket one-quarter turn counterclockwise and pull the bulb and socket out of the lamp reflector.

8. Pull the old bulb from the bulb socket keeping the bulb straight as you pull it out.

9. Install a new bulb.

10. Reverse the steps to reinstall the lamp assembly.